Send Message
Guangdong Jinhonghai New Material Technology Co., Ltd
products
products
Home > products > Hot Melt Adhesive Film For Textile Fabric > 0.30mm TPU Hot Melt Adhesive Film For Textile Fabric Customized

0.30mm TPU Hot Melt Adhesive Film For Textile Fabric Customized

Product Details

Place of Origin: China

Brand Name: HYD

Certification: CE

Payment & Shipping Terms

Minimum Order Quantity: 5meters

Price: 4.68~4.78usd/meter

Packaging Details: Foam&carton

Delivery Time: 3~7days

Payment Terms: T/T, L/C, D/A, D/P, Western Union, MoneyGram

Supply Ability: 2000000meters/month

Get Best Price
Highlight:

0.30mm Hot Melt Adhesive Film For Textile Fabric

,

TPU Hot Melt Adhesive Film For Textile Fabric

,

Customized TPU Adhesive Film

Product Name:
TPU High Elastic Spandex Omentum
Color:
Milky
Temperature:
160~180 Degree C
Rebound Ratio:
1:1.2
Stretch Ratio:
1:6~7
Width:
30~150cm Or Customized
Size:
50yards/roll
Application:
Seamless Underwear, Swimsuit, Wetsuit, Etc.
Product Name:
TPU High Elastic Spandex Omentum
Color:
Milky
Temperature:
160~180 Degree C
Rebound Ratio:
1:1.2
Stretch Ratio:
1:6~7
Width:
30~150cm Or Customized
Size:
50yards/roll
Application:
Seamless Underwear, Swimsuit, Wetsuit, Etc.
0.30mm TPU Hot Melt Adhesive Film For Textile Fabric Customized

Seamless Underwear Glue Film Hot Melt Adhesives & Leather Fiber & Garment

 

This product is a solid film form, the bottom with release paper, non-tacky at room temperature, uniform thickness.
Easy to operate, without a lot of manual gluing, less product obsolescence rate, can die.


Temperature can be selected between 80-150 degrees. The factory production, mature technology, stable quality, pure green, non-toxic, odorless operation, ROHS directive.

 

Product name TPU High Elastic Spandex Omentum
Material Polyurethane
Color Milky
Temperature 160~180 degree c
Thickness 0.30mm
Width 2~150cm
Stretch ratio 1:6~7
Application

Seamless underwear, swimsuit, wetsuit, etc.

 

Cautions:

1. Tear-off method: cool tearing is required, hot tearing is not possible immediately, because the material is still in an activated state after high-temperature and high-pressure hot stamping, and the surface may be uneven and gloss may be uneven after being torn off immediately, which affects the appearance quality.

2. The printing film is a soft product. A slight stickiness on the surface is normal, and the surfaces should be prevented from sticking to each other.

3. Reasonably control the temperature and pressing time. If the stamping temperature is too high or the time is too long, it will easily cause discoloration or decrease in elasticity.

4. Due to the particularity of the product itself, we suggest not to use corrosive detergents, dry cleaning or use bleaching agents, it is best to use water below 40 ℃, cold water is the best, please wash the reverse side. Keep the color for a long time.

5. The washing time is 12 hours after pressing and ironing, the effect is better.

FAQ

Q1) . How do I learn about hot melt adhesive film and heat transfer vinyl ?
(1) For the hot melt adhesive film which is adhesive film with release paper. The film is solid in room temperature and it would melt when heated to get its melt point,it is used to bond many materials, Different materials of hot melt adhesive film get different performances and different usages.
(2) For the heat transfer vinyl shich is made from PU materials with high eco-friendly performance. The vinyl is easily cutting, easily weeding, easily transfer to fabric and strong adhere to the fabric which could be durable long time.Very popular for DIY designs.
We shall learn about your demands,and recommend you with suitable products.
Q2) . What is hot melt adhesive film?
A: It is just a film, and the basic material is release paper. But the film is solid in room temperature, when reach its melt point, it is able to bond other materials, Different materials of hot melt adhesive film have different performances and different usages, we need understand your products needs, then recommend you right products,
Q3). Do you accept OEM or ODM?
Yes ,we accept OEM and ODM, we are professional heat transfer material manufacturer ,having more than 10years domestic sale experience, we are able to assist you R&D new products. So if you need bonding some special materials, please don't hesitate to let us know,
Q4). How do you ship the products?
If you are not urgent, we usually transport by sea in large quantity, which is the cheapest shipping way. And for samples and urgent cargo, we transport it by air or by express, as it is the fastest way etc,
Q5). Do you provide sample? And how many days it will take?
If you need some sample for your reference,do feel free to let us know your fully address/ship
Q6). How long is the lead time?

Sample lead time: 1-3 days
Bulk lead time: 7-20days(depends on order quantity),
Q7). How do I pay for my order?
We usually accept L/C ,T/T ,Western Union , Paypal.

0.30mm TPU Hot Melt Adhesive Film For Textile Fabric Customized 00.30mm TPU Hot Melt Adhesive Film For Textile Fabric Customized 1